bosboot warning message

Problem:

On AIX 5.2 server, got warning message which means scary when building boot image on hdisk0.

aixserver:/root# bosboot -ad /dev/hdisk0

bosboot: Boot image is 24922 512 byte blocks.

***** ATTENTION *****
The boot image you just created might fail to boot because
the size exceeds the system limit. For information about
fixes or workarounds, see /usr/lpp/bos.sysmgt/README.
***** ATTENTION *****

aixserver:/root# oslevel -s
5200-10-06-0835

Solution:

Since the boot image is over the 12Mb line, you will see this warning.
Older systems cannot handle a large boot image like this, but with the
latest system firmware and at your 5.2 ML 8 this server will boot up
fine, as you have the necessary APARs installed to boot from the larger
image.

You will still see this warning however when you run bosboot or if
mksysb runs bosboot, but you may ignore it.  You may also see this on
other systems once the boot image has grown past 12Mb, such as with
adding new disks or adapters to the system.

Check the system firmware level, this server is at SF240_284, which support boot image greater than 12MB. So we can ignore this warning message.

# lsmcode
┌──────────────────────────────────────────────────────┐
│ │
│ Building Resource Database. │
│ Please stand by. │
└──────────────────────────────────────────────────────┘
DISPLAY MICROCODE LEVEL 802811

Determining Microcode levels.......

Please stand by.

DISPLAY MICROCODE LEVEL 802811
IBM,9117-570

The current permanent system firmware image is SF240_284
The current temporary system firmware image is SF240_284
The system is currently booted from the temporary firmware image.